diy wedding drape double valance
Sale!
DISCLAIMER: RENTALS MAY BE DIFFERENT FROM IMAGES DUE TO PRODUCT SELECTION, MODEL VARIATIONS, COLOR VARIATIONS, QUANTITY, SETUP TIME, & VENUE FACTORS. PRICING & AVAILABILITY MAY CHANGE WITHOUT NOTICE PRIOR TO PLACING ORDER
 

Pipe and Drape Double Valance (7′ – 10′ Long Section)

$161.00 $122.00

Note: fabric can not be cut, altered or dyed & must be returned to us in the same condition you received it in

Double valance wedding drape is our most requested style for wedding head table backdrops. This double backdrop draping creates a timeless look on a budget. Some wedding vendors charge over $800 for a backdrop. Instead of paying for their labor do it yourself & save with our easy to setup drapery rentals. This design is 2 layers of straight drapery with the front layer pulled back. The front draping is suspended on a 2nd crossbar. The pulled back fabric creates more fullness. Learn how to setup a wedding backdrop & rent double valance pipe & drape for receptions & events. Read More...

 

Easy Do It Yourself Rentals (1 Min)

Learn how to setup this rental by watching the video below

Check Your Dates Availability Now
 
State:
Event Date:

Description

 

 

 

📦  Includes: (2) uprights, (2) base plates, (2) cross bars, (2) valance hangers, (8) pieces of drapery fabric, zip-ties
🌈  Fabric Color: Default is white however purple, light purple, red, pink, champagne, teal, blue, black, silver sequin, & gold sequin fabrics are available (reserve 2 battery powered uplights per 10 foot section to get more colors)
🔥  Flame Retardant Fabric: Yes
⬜  Wrinkle-Resistant Drapery: Yes
⚖️  Weight & Dimensions: view in additional information tab above (assembled 10 foot length by up to 10 feet tall)
⏱️  Approx Setup Time: 25 minutes per 10 foot section
📆  Duration: Send back within 2-day after your event date to avoid late fees
🇺🇸  ShipOur.Wedding offers FREE Nationwide Shipping both ways on orders over $94

 

(12) Important DIY Double Valance Pipe & Drape Wedding Tips, Tricks & Pro Advice >>

Read More...

Additional information

Weight 71.74 lbs
Dimensions 57 x 19 x 7 in

Reviews

There are no reviews yet.

Be the first to review “Pipe and Drape Double Valance (7′ – 10′ Long Section)”

Easy Setup Instructions

How to setup wedding backdrop that is double valance

  1. place crossbars end to end on the ground and center on the space you want to drape
  2. put base plates at the bottom edges of all the crossbars (make sure ferrule pin is screwed into center hole)
  3. slide uprights into the baseplates ferrule pin all the way (do not force upright down onto ferrule pin all the way if they don’t fit, only force down 50% if tight)
  4. attach crossbars between (2) uprights slots, make sure crossbar is in the slot all the way (do this for all crossbar sections)
  5. now that you have a fully completed skeleton, throw (4) pieces of fabric over each single crossbar (try to keep the same amount of fabric on both sides of a single crossbar when throwing it over) Tip if you are using silver sequin or gold sequin fabric then you will insert this crossbar into the pole pocket
  6. pleat fabric overlap fabric edges & cover any hardware, make sure the center of your crossbar is the center point of the 2 pieces of overlapped fabric)
  7. slide the valance hangers into the front slot of the top upright mounting point for all uprights
  8. attach crossbars between (2) valance hangers, make sure crossbar is in the slot all the way (repeat this for each 10 foot section)
  9. throw (4) pieces of fabric over each new crossbar only (have half on one side and the other half on the other side of crossbar) do not have this piece of fabric go over both crossbars (you should have two rows of fabric each on their own individual crossbar) Tip if you are using silver sequin or gold sequin fabric then you will insert this crossbar into the pole pocket
  10. pleat fabric on new front cross bar, overlap fabric edges & cover any hardware, make sure the center of your crossbar is the center point of the 2 pieces of overlapped fabric)
  11. use a zip-tie or clip on the back of the 2 pieces in the center front row of fabric (repeat this for each 10 foot section) this holds together your fabric when you pull it back in steps 13-15
  12. raise uprights individually in 2 foot increments until entire backdrop is 10 foot high
  13. pull back only 2 front left pieces of fabric and gather towards left upright, adjust fullness by accordion pieces in hand, attach with zip-tie or pipe cleaner to left upright, do not pull back layer of fabric
  14. pull back only 2 front right pieces of fabric and gather towards right upright, adjust fullness by accordion pieces in hand, attach with zip-tie or pipe cleaner to right upright, do not pull back layer of fabric
  15. repeat steps 13 & 14 if you have more than 10 feet of draping
  16. finalize back row of draping by lifting each piece of fabric on the back only, accordion back fabric down, and tuck and roll the bottoms

QR Code

Scan for Fast Access to this Product Page

You may also like